Front bumper PPF
Focused protection for the highest-impact painted bumper area.
From $649- 1350 E Georgia, Vancouver BC
- 604-620-6994
- info@elementslabs.ca
- Mon - Fri 8:30am - 5:30pm | Sat 9:00 am- 4:30pm
Vancouver and Burnaby PPF planning usually starts with commute exposure: East Vancouver lane changes, Boundary Road, Highway 1, Lougheed, Metrotown parkades, construction grit, and frequent wet-road debris all affect which panels are worth protecting first.
For daily driven vehicles, Elements Labs keeps the PPF conversation focused on impact zones, edge quality, film coverage, and whether the vehicle needs paint correction before film. Burnaby drivers can use the Burnaby service area page for location planning, while this page stays the canonical PPF service reference. For service-area planning, use the Burnaby service area page. For quotes or scheduling, use Elements Labs contact.
PPF protects impact-prone panels from rock chips and road debris. Ceramic coating supports gloss, slickness, hydrophobic behaviour, and easier washing. If you are comparing both, use the guide before choosing a package.
PPF package pricing is vehicle-dependent and changes with coverage, film finish, panel complexity, edge work, and paint condition. Common starting points include front bumper, partial front, standard front, premium, full gloss, full matte, and Tesla-specific packages.
Elements Labs installs KAVACA paint protection film for drivers who want physical protection against rock chips, road debris, road salt, parking-lot contact, and high-impact panel wear. The right package depends on how the vehicle is used, which panels are exposed, and whether the owner wants gloss, matte, or broad full-body coverage.
Focused protection for the highest-impact painted bumper area.
From $649Entry front-end coverage for common rock-chip exposure zones.
From $1,099Expanded front protection for daily drivers and new-vehicle delivery prep.
From $1,749Broader impact-zone planning for highway, bridge, and mountain-road use.
From $2,249Full-body gloss film coverage for owners who want broad painted-panel protection.
From $4,999Full-body matte film coverage for satin finishes, matte conversions, and factory matte paint.
From $5,499Full front PPF is built for the bumper, hood, front fenders, mirrors, and leading impact zones. Full body PPF extends protection across all painted panels for owners who want broader coverage on doors, quarter panels, roof rails, and rear panels.
Gloss KAVACA film protects while preserving the painted finish. Matte KAVACA film protects satin and matte finishes or creates a matte look while keeping the film serviceable and maintainable.
Daily drivers usually start with front-end coverage. Highway, mountain-road, performance, and track pack use often needs rocker, lower door, rear quarter, and other high-exposure panel planning.
Up to 12 years of manufacturer-backed KAVACA warranty coverage applies on eligible packages. Elements Labs provides delivery aftercare guidance so washing, edges, and maintenance are handled correctly.
Vehicles from Porsche, Audi, Bentley, Tesla, and Rivian have been protected at Elements Labs. Existing planning pages cover Tesla, Porsche, and Rivian PPF use cases without making manufacturer endorsement claims.
See real Elements Labs project examples before choosing coverage. The first published proof page is a 2022 Tesla Model Y Ultimate Armour build with front-end PPF, Ultimate ION ceramic coating, paint correction, chrome delete, and caliper paint.
PPF is the physical protection layer for rock chips and road debris. Ceramic coating supports gloss, slickness, hydrophobic behavior, and easier washing. Many vehicles use PPF on impact-prone panels and ceramic coating over paint or film for maintenance support.
KAVACA film for rock chips, road debris, and long-term paint protection.
PPF Vancouver
Elements Labs installs KAVACA paint protection film for Vancouver and Metro Vancouver drivers who want real physical paint protection, not cosmetic claims. PPF is the correct choice for rock chips, road debris, and high-impact panels.
Get a PPF Estimate
Call 604-620-6994
Email the shop
Elements Labs is based at 1350 E Georgia St in Vancouver and serves Vancouver, Burnaby, Richmond, North Vancouver, West Vancouver, and Surrey. Use this page to confirm the right package, then request a quote before booking.
PPF Vancouver PPF Burnaby PPF Richmond PPF North Vancouver PPF West Vancouver PPF Surrey Ceramic coating
Service summary: Elements Labs is an automotive protection shop at 1350 E Georgia St in Vancouver. The shop installs KAVACA PPF for drivers from Vancouver, Burnaby, Richmond, North Vancouver, West Vancouver, and Surrey. PPF is the service that protects paint from rock chips and physical road damage.
PPF in Vancouver usually ranges from about $1,200 for targeted coverage to $6,000+ for full-body protection. Most full-front packages land between $1,800 and $2,800 depending on vehicle size and edge complexity. Elements Labs maps coverage to driving pattern, panel risk, and ownership goals.
Quality PPF can last many years when installed and maintained correctly. KAVACA film carries up to 12 years of manufacturer-backed warranty coverage. Elements Labs uses KAVACA film and provides aftercare guidance at delivery.
Yes, PPF is usually worth it on higher-value vehicles where repainting front panels is expensive and visible. A bumper and hood repaint can cost thousands of dollars on premium finishes. Elements Labs regularly protects Tesla, Porsche, and Range Rover vehicles around Vancouver.
PPF is for physical impact protection, while ceramic coating is for gloss, hydrophobic behavior, and easier cleaning. PPF uses a thicker film layer; ceramic coating is a thin chemical coating. Elements Labs often combines both so impact zones get film and exposed surfaces stay easier to maintain.
Yes, ceramic coating can be applied over PPF to improve hydrophobic performance and make washing easier. The coating does not replace film for impact protection. Elements Labs commonly uses this stack when the owner wants both rock-chip resistance and easier maintenance.
Check FAQ more about PPF here.
Paint Protection Film or PPF is a virtually invisible urethane film that is installed on vehicles to protect vehicle paint from damage and degradation. It also helps to maximize resale value with self-healing, and chemical and stain-resistant features.
Each piece of film is precision-cut to fit your vehicle perfectly with the help of our design access program and plotter. In places where pieces can be folded over for added protection and invisibility, it is folded.
Once installed, it acts as an added layer of protection to your vehicle’s paint, preventing damage from everyday irritants like road debris, and unwanted impact.
When exposed to heat, scratches and swirl marks fade over time
Protects against acidic bird droppings, road grime and graffiti
Superior impact protection from road hazards
80,000+ precise vehicle panel patterns available
Comes with a 12-year warranty
Yes, it is. If you’re looking for ways to maintain your vehicle’s appearance, Paint Protection Film – PPF protects your vehicle’s paint from damage and premature aging.
Not only does paint protection film act as a barrier to rocks and scratches, but it is also a barrier to everyday nuisances like bird droppings, tree sap, UV rays, and acid rain, among other things.
You can’t control the environment surrounding your car, but you can control how your car handles the environment.
It is specifically designed to protect painted surfaces and other materials from abrasion, corrosion, chemicals, and other types of physical damage.
Have all the benefits of self-healing paint protection film with the added hydrophobic and self-cleaning action of a Ceramic Pro ceramic coating. This film helps you save money by saving the labor-intensive step of adding Ceramic Pro after PPF is installed.
KAVACA Matte Finish PPF gives you the flexibility to instantly transform your gloss paint job to a deep, rich, matte finish at a fraction of the cost of a new matte paint job. Can be installed on the car’s paint and carbon fiber parts.
KAVACA Matte is infused with a proprietary adhesive formulation that provides better adhesion than other films on the market.
If you are comparing coverage for a specific vehicle, these pages explain how Elements Labs scopes PPF by use case, panel exposure, and maintenance goals.